TI-1248 450 ml Double-Wall Vacuum Flask

Five hundred pieces per design in the stock colours (Blue, Red). A matched Pantone starts at 1,000 — a custom colour is its own spray run rather than a draw from stock. You can mix stock colours to reach the 500, which several buyers do on a first order to see which shade moves.

Yes, from the first 500 pieces — there is no separate logo minimum. Four methods in-house: silk screen, laser engraving, heat transfer and UV print. The straight body gives an uninterrupted panel with no seam to work the artwork around. Send a vector file and we return a print proof showing how it sits on this body before anything runs. Tell us the end use and we will say which method we would run and why.

Two routes. Stock colours — Blue, Red — ship from inventory at 500 pieces per design, so a sample reaches you without waiting on a spray run. A matched Pantone runs from 1,000 pieces as its own spray batch: you send the Pantone reference, we spray a sample, you approve it, and only then does the line start. The first unit off the bulk run is then compared against that approved sample before the rest continues.

30% deposit to start production, 70% before shipment. On smaller orders we often settle the whole amount against the proforma invoice instead — two transfers cost both sides bank charges that are not worth paying on a modest total. Either way the terms go in writing on the PI rather than being agreed later. If your company has its own process, tell us early and we will work to it.

Freight is worked out per order rather than from a table, because it depends on the cubic volume and how you want it shipped. Once you have picked the models and settled the quantity, send us the delivery address and we come back with the carton count, the cubic and the freight — by sea, by air or door-to-door, whichever suits the date you are working to. Ask for FOB and DDP side by side if you want to compare handling the import yourself against one delivered price.

Send a drawing, a photo of something close, or just describe it. We come back with what is feasible on our existing tooling and what needs new tooling, with the cost and the lead time for each — before you commit to either. Most programmes start on an existing body with your own colour, decoration and packaging; new tooling makes sense once the volume justifies it, and we will say plainly when it does not.

Six steps, and you set the pace at each one. 1. Send the enquiry — quantity, destination, and the in-hands date if you have one. 2. The quotation comes back with carton cubic already in it, so you can model landed cost before replying rather than asking for it. 3. Take a sample if you want one — or order straight from artwork if you already know the model. 4. Proforma invoice, then the deposit. 5. Production, 30 days from artwork approval; the first unit off the line is checked against the reference you approved. 6. Balance, then shipment with the full document set.

The straight body gives you an uninterrupted panel — no curve to fight, no seam to work around. Send your artwork and we return a print proof showing exactly how it sits on this body, at the size you want, before anything runs. If the mark is too fine for the method you picked, we will say so at the proof stage rather than after the run.

Around 30 days from artwork approval for a stock colour. A matched Pantone adds a spray run; peak season before Christmas and Ramadan adds time too. Tell us the date you need it in hand and we plan backwards from there — and say early if it does not fit rather than accepting it and hoping.

We hold GRS V4.0 for recycled content — the certificate is on this page. Stainless is itself recyclable at end of life, which is often the more useful point for a brief than the packaging. If the requirement is written into your tender, send us the wording and we will say plainly what we can and cannot evidence.